LoadCell CAS WBK-D

Rp. CALL

Last Updated

21 Sep 2021

Minimum Order

1 unit

Specification of LoadCell CAS WBK-D

LOAD CELL CAS WBK-D

CAS WBK-D digital load cell is designed for use in truck scales and process weighing applications. It is a stainless steel compression load cell with a digital output signal. Using the digital output, the user can communicate with each load cell independently and have the additional advantages of a digital calibration.

FEATURES : CAS WBK-D DIGITAL LOAD CELL
** Simple installation and effective maintenance	** High accuracy RS-485 digital output
** Stainless steel construction	** IP68 and hermetic sealing
** Diagnosis function	** Built-in lighting protection device
** Maximum transmission distance : 1,000m

SPECIFICATIONS : CAS WBK-D DIGITAL LOAD CELL
Capacity (R.L.)			: tf	: 10, 20, 25, 30
Maximum number of verification intervals (n)			: –	: 5,000, C4 (OIML)
Rated Output			: counts	: 300,000
Zero Balance			: counts	: ± 300
Non-Linearity Hysteresis Combined Error Repeatability Creep for 30min			: % R.O. : % R.O. : % R.O. : % R.O. : % R.O.	: < 0.015 : < 0.015 : < 0.015 : < 0.01 : < 0.017
Temperature Effect on	Zero Value Output Value		: % R.O./10˚C : % R.O./10˚C	: 0.014 : 0.011
Compensated Temperature Range			: ˚C	: -10 ~ +40
Operating Temperature Range			: ˚C	: -40 ~ +70
Excitation Voltage		Minimum Recommended Maximum	: V : V : V	: 6 : 9 : 24
Safety Overload			: % R.C.	: 150
Material			: –	: Stainless steel
Communication			: –	: RS-485 (2wire)
Communication Rate			: kbit/sec	: 19.2
Maximum Transmission Cable Length			: m	: 1,000
Warm-up Time from Cold Start			: minutes	: 15
Asynchrone Interface Baud rate			: Baud	: 9,600 ~ 115,200
Number of Bus Addresses			: –	: Max. 16